1317176-2A-A 1
21335T Multi-function Hand Shower - Round
21336T Multi-function Hand Shower - Square
INSTALLATION INSTRUCTIONS
ROUGH-IN DIMENSIONS
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. The highest working pressure for hand shower is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer
is needed. The highest water and environment temperature is 60°C. Please keep hand shower, shower head and
the shower arm away from heater, or it may become damaged and cause injury to the user.
BEFORE YOU BEGIN
SHIFT
+
INSTALLATION
How to Install the Hand shower
Flush both water supply for about one minute before the
hand shower(1) is installed.
Put the screen washer(3) into the shower hose(4)
connector. Connect the hand shower to shower hose.
NOTE: Don’t over tighten.
Install regulator(2) into the hand shower inlet if needed.
Connect another end of shower hose to the water
supply.
21335T 21336T
Ø28
28 28
250
G1/2˝
G1/2˝
1
2
3
4
To Next Page
Need help?
General
