Kohler SPACITY K-28020T-S User Manual

-3-
Unit: mm
:
Reference Value
Kohler reserves the right to change marked dimensions without prior notice.
Fig.#1
1
Finished Wall
Supply
Reference
Front of bowl
372
679
400
428
695
200
400
For K-28021T
380
For
K-28021T
305
For K-28020T
285
For
K-28020T
180
TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a sponge
to remove the remaining water from the tank and bowl.
Disconnect the supply shut-off valve (if present), and remove
the old tank and bowl.
()
INSTALLATION
Fig.#2
2
Remove the old gasket from the floor
and the closet flange with a putty knife.
Remove the old T-bolts and discard
them.
if the new toilet is not
installed immediately, temporarily stuff
a rag into the closet flange.
NOTICE:
T
NOTICE: Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
Closet Flange
1535881-T2-A

Kohler SPACITY K-28020T-S Specifications

General

Brand	Kohler
Model	SPACITY K-28020T-S
Category	Toilets
Language	English