Kohler REVIVAL - User Manual



116627-2-AC
2000 Kohler Co.

REVIVAL

VITREOUS CHINA
REVERSE TRAP TOILET
BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and
installation sequences. Follow the sections that pertain
to your particular installation. This will help you avoid
costly mistakes. In addition to proper installation, read
all operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler Co. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning,
and warranty information – please leave instructions
for the consumer.
NOTES
 Observe all local plumbing and building codes.
 Shut off the water supply.
 Ensure that the new toilet has the correct
roughing-in dimension of 12”. See Fig. #3.
 Be very careful while working with vitreous china
products. Vitreous china can break or chip if the
bolts and nuts are overtightened, or if carelessly
handled.
 Carefully inspect the new fixture for any sign of
damage.
 Fixture dimensions are nominal and conform to
tolerances established by ANSI Standards
(A112.19.2).
 For new construction, refer to the dimensions in
Fig. #3 for locating the supply shut-off valve.
 Provide adequate trip lever clearance if shelving
or other structures are to be installed above the
toilet tank.
TOOLS AND MATERIALS REQUIRED
 10” adjustable wrench
 12” pipe wrench
 Metal file (file cut)
 Tape measure
 Tubing cutter
 Level
 Hacksaw
 Putty knife
 Screwdriver
 Toilet gasket (wax seal)
 Toilet T-bolts (2), 5/16” diameter
 Toilet setting compound (optional)
 Toilet supply shut-off valve, 3/8” recommended
NOTICE: If the existing toilet does not have a supply
shut-off valve below the tank, install one before installing
the new toilet.

Kohler REVIVAL Specifications

General

Toilet Type	Two-Piece
Bowl Shape	Elongated
Material	Vitreous China
ADA Compliant	Yes
WaterSense Certified	Yes
Rough-in	12 inches
Flush Type	Gravity
Color	White

Summary

Before You Begin

How to Use These Instructions

Instructions on how to read and follow the installation guide for best results.

Installation

To Remove Existing Toilet

Steps to remove the old toilet and prepare the installation area.

To Install Supply Shut-Off Valve

Instructions for correctly installing a new water supply shut-off valve.

To Install Toilet

Steps for setting the toilet bowl onto the flange and securing it.

To Install Tank

Instructions for attaching the toilet tank to the bowl assembly.

To Connect Supply Shut-Off Valve

Details on connecting the water supply line to the shut-off valve and toilet shank.

To Fill Float Valve With Ballast

How to fill the float valve with ballast for proper operation.

To Install Lift Rod and Tank Cover

Steps for installing the lift rod and securing the toilet tank cover.

Troubleshooting Chart

Important Consumer Information

Consumer Responsibilities

User's duties regarding cleaning and maintenance of the toilet.

Requesting Service

How to contact Kohler for service or warranty claims.

Limited One-Year Warranty

Details of the product's one-year limited warranty terms and conditions.