Kohler WHIRLPOOL - Keypad Instructions

5
!
!
L0
L0
L2
L6
!
!
Massage Pump On/Off and Strength Adjustment
Press , pump is on with massage strength of
L0. Press again to stop. Press to,
pump is on with massage strength of L0. Press
to increase to L2. Continue to press to
increase to L6.
""
"" ""
"" ""
Pipe Cleaning
Start piping cleaning by pressing " ", and pipe
cleaning animation is displayed. Press again to stop
pipe cleaning. Meanwhile, electronic drain is open.
!
!
!
/
/
!
!
!
Display Panel
Display water temperature in the bath and display
air temperature when the bath is empty.
Before taking bath, please make sure of water
temperature with hands.
When massage pump is on, massage strength is
displayed.
Electronic Drain
Start the drain by pushing the button " " once,
drain animation is displayed. Push again to stop it.
When pushing this button, a slight sound can
be heard from the drain at the bottom of the bath.
Power On/Off
Push the button " " to start system and enter
standby mode.
Push " " to stop system.
Note:
Tip:
KEYPAD INSTRUCTIONS
Power On/Off
Electronic Drain On/Off
Massage Pump On
Massage Strength Adjustment
Massage Pump On/Off
Massage Strength Adjustment
/
Pipe Cleaning
Display Panel: Water Temperature,
Massage Strength, Drain, Pipe Cleaning
1283904-T01-B