2
3
WARNING INDICATORS
1. Low voltage battery
2 The scale fail to operate, please charge the
battery
3 The maximum capacity has been exceeded
Remove the item to prevent scale malfunction.
WEIGHING PROCEDURE
Place the scale on a solid and flat
surface.
Place bowl (if used) on the scale.
Press "ON/OFF" to turn the scale on.
4. Wait until LCD shows "0" to start
weighing. Press the "UNIT" button to
convert to weight mode if needed
Load weighing object on to start
weighing. LCD will show the weight
reading
f the weighing object is water or mi k,
press the "UNIT" button to choose
volume mode and view the volume of
the weighing object
ONI
u
UNI
put in container
n roam
TAR
n nnn„
U.UUU
put the object
ü.68ü
UNI
2.
3
5
6
WARNING INDICATORS 4
To Next Page
Loading...