CALIBRATING PROCEDURE
Inn
Ill
TAR
U
Take off all the objects
Inn g
Ill
TAR
To ascertain the precise weight without
removing loads from the scale surface, you
need to tare the scales
Put the first load/bowl on the scale, get a
weight reading. Press the "TARE" button
briefly to reset the LCD reading to "O"
before adding the next load/bowl The scale
is tared
You can repeat this operation Take off all
the objects. It indicates the actual negative
weight, press the "TARE" button to return
estimated value to zero
Note:
Zero/Tare Function (If an item
only tared weight "O" is displayed, if an item
is 21 —tared weight "O" and "TARE"
indicator are displayed)
5 CALIBRATING PROCEDURE
To Next Page
Loading...