5
Electrical Requirements
Before you move your icemaker into its final location, it is important to
make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz.), properly grounded in
accordance with the National Electrical Code and local codes and
ordinances, is required.
It is recommended that a separate circuit, serving only your icemaker, be
provided. Use receptacles that cannot be turned off by a switch or pull
chain.
The fuse (or circuit breaker) size should be 3 amps.
Recommended grounding method
For your personal safety, this appliance must be grounded. It is
equipped with a power supply cord having a 3-prong grounding
plug. To minimize possible shock hazard, the cord must be plugged
into a mating 3-pronged and grounding-type wall receptacle,
grounded in accordance with the National Electrical Code and local
codes and ordinances. If a mating wall receptacle is not available, it
is the personal responsibility of the customer to have a properly
grounded, 3-prong wall receptacle installed by a qualified
electrician.
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter.
Never use an extension cord.
Failure to follow these instructions can result in fire,
electrical shock, or death
To Next Page
Loading...
Need help?
General
