EdgeStar Dishwasher 6
Operating Instructions
To get the best performance from your dishwasher, read all operating
instructions.
Checklist Before using your Dishwasher
The following things should be checked before using the dishwasher.
1. The dishwasher is level
2. The hot water faucet is opened
3. There are no leaks at the drain and inlet ports.
4. The unit’s power plug is connected to a grounded outlet
5. The power is switched on
6. There are no kinks in the drain and inlet hoses
7. All packing and printed materials are removed from the dishwasher
Control Panel Functions
1. Power Button: Press to turn the unit On/Off.
2. Program Selector Dial: Rotate the knob to select wash cycle
a. Wash cycle descriptions listed on next page
3. Start/Pause Button: Press to START or PAUSE the unit
Error Codes
E1 – Long water inlet time – Faucet may not be opened or water
pressure is too low.
E4 – Overflow – dishwasher may be leaking.
To Next Page
Loading...