5
OPERATION
Installation Check List before Operation
1. Have all packing materials and tape been removed from
the interior and exterior of the wine cooler?
2. Have the installation instructions been followed, including
connecting the machine to electricity? And has proper
grounding been installed for the wine cooler?
3. Has the machine been leveled?
4. Is the wine cooler in a location where the ambient
temperature is around 78º F all year round?
5. Is there a clearance of at least 5” at the rear, 4” at the top
and 4” at the sides for proper air circulation?
Adjusting the Temperature
Internal Control Box
You may adjust the temperature of the wine cooler using the
temperature control knob inside of the unit. Turn and adjust
the knob until you reach your desired temperature. The wine
cooler has a range of 52°F to 64°F. Whether your wine
cooler can reach the actual set temperature depends on the
ambient environmental conditions.
Turn temperature knob to your left for warmer and to your
right for cooler.
Click on the light switch to turn on or off.
Notes:
Allow at least 24 hours
before storing your wines
and to allow the temperature
to acclimate.
Radio devices may interfere
with the touch sensitive
controls and cause the
temperature settings to
change. Move radio devices
away from the wine cooler.
Temperature Knob
Light Switch
To Next Page
Loading...
