Kolida KTS-442UT Series User Manual

1
CONTENTS
FOREWORD
1. Features ………………………………………………………..…………………………………………..6
2. Precautions……………………………………………...………………………………………………......7
3. Nomenclature……………………………………………………………………………………………... 9
4. Key functions……………………………..…………………………………………………………….....11
5. Character entry……….…………….………………………………………………………………….......14
6. Display symbol………...………………………………………………………………………………......15
7. Mode Configuration……………………………………………………………………………………....15
PART 1 PREPARATION FOR MEASUREMENT……………………………….………19
1. Unpacking and store of the instrument ……………………………………………………………….…..19
2. Setting the instrument up…………………………………………………………………………….…....19
3. Battery dismounting, information, recharging……………………………………………………………..21
4. Reflector prisms….…………………………………………………………………………………...….22
5. Mounting and dismounting the instrument from tribrach……………………………………………….….22
6. Eyepiece adjustment and object setting………………………………………………………………...….23
7. Power on/off and preparation for measurement…………………………………………………….….......24
7.1 Power on/off…………………………………………………………………………………………….24
7.2 Vertical Angle Tilt Correction ………………………………………………………………………....….24
7.3 Display Illumination………………………………………………………………………………….….26
7.4 Setting the Instrument Options…………………………………………………………………………....26
7.5 Setting Instrument Constant………………………………………………………………………………29
7.6 Setting LCD Contrast……………………………………………………………………………..…...…30
7.7 Setting Date and Time…………………………………………………………………………..………...31
7.8 Explanations…………………………………………………………………………………………....32
PART 2 BASIC MEASUREMENTS …………………………………………………..…….33
8. ANGLE MEASUREMENT………………………………………………………………………...33
8.1 Measuring the Horizontal Angle Between Two Points（Horizontal Angle 0）………………………….…33
8.1.1 Example Measuring the Horizontal Angle between Two Points….. …………………………………….34
8.2 Setting the Horizontal Circle to a Required Value …………………………………………………………35
8.2.1 Use HSET function to set a required direction value ……………………………………………………35
8.2.2Use HOLD to set a required direction value ……………………………………………………………..35
8.3 Horizontal Angle Display Selection（Right /Left）…………………………………………………….….36
8.4 Horizontal Angle Repetition ……………………………………………………………………………...37
8.5 Slope in ％……………………………………………………………………………………………...39
9. DISTANCE MEASUREMENT………………………………………………………………….…39
9.1 Settings for Distance Measurement ………………………………………………………………...….. ..40
9.2 Laser direction and laser plummet ………………………………………………………………….……42

Kolida KTS-442UT Series Specifications

General

Type	Total Station
Model	KTS-442UT Series
Category	Measuring Instruments
Battery Life	8 hours
Laser Plummet	Yes
Display	LCD
Communication	USB, Bluetooth
Operating Temperature	-20°C to +50°C
Accuracy	±(2mm + 2ppm)

Summary

FOREWORD

1. Features

Complete surveying program, data record, and parameter setting for professional and construction survey.

2. Precautions

Important safety guidelines and handling instructions for operating the instrument to prevent damage or injury.

3. Nomenclature

Identification and labeling of key components and parts of the KTS-442UT total station.

4. Key functions

Overview of the instrument's keyboard layout, power, soft keys, and operating keys for basic use.

5. Character entry

Procedure for entering alphanumeric data, job names, and codes using the instrument's keyboard.

6. Display symbols

Meanings of symbols displayed on the MEAS mode screen for various measurement parameters.

7. Mode Configuration

Explanation of the instrument's operating modes and the relationships between them in a mode diagram.

PART 1 PREPARATION FOR MEASUREMENT

1. Unpacking and store of the instrument

Steps for safely unpacking the instrument from its case and storing it properly after use.

2. Setting the instrument up

Procedures for setting up the instrument on a tripod, leveling, and centering precisely over the survey point.

3. Battery dismounting, information, recharging

Instructions for removing, checking power levels, and recharging the instrument's battery.

4. Reflector prisms

Description and types of reflector prisms used for distance measurement with the instrument.

5. Mounting and dismounting the instrument from tribrach

Steps for securely attaching and detaching the instrument to and from the tribrach.

6. Eyepiece adjustment and object setting

Method for adjusting the eyepiece and setting the focus for clear sighting of the target.

7. Power on/off and preparation for measurement

Procedures for powering the instrument on and off, and initial preparation steps before measurement.

PART 2 BASIC MEASUREMENTS

8. ANGLE MEASUREMENT

Explains procedures for measuring horizontal and vertical angles, including setting values and repetition.

9. DISTANCE MEASUREMENT

Covers settings and procedures for performing distance measurements, including reflectorless EDM.