Vers. 140323 rev
D. SETTINGS: Setting section (reports, graphics, date, torque tester info).
Picture 6: “SETUP”Section
1- REPORT
- Path: path to search the image file to enter in the head of the report.
We suggest to upload images not bigger than 240x240 pixels.
- Dimension X: Value of adaptation along the X axis of the uploaded image.
- Dimension Y: Value of adaptation along the Y axis of the uploaded image.
-Torque range: the value should be included in the pre-set torque range to be defined as
correct.
To Next Page
Loading...
