Do you have a question about the Kolver K-DUCER and is the answer not in the manual?
Type | Ultrasonic Cleaner |
---|---|
Ultrasonic Frequency | 40 kHz |
Power | 120 W |
Weight | 2.5 kg |
Material | Stainless Steel |
Details mounting bracket dimensions and KDU unit installation.
Instructions for using the screwdriver lever and reverse button.
Describes the process of saving rundown results to a USB drive.
Explains compatibility and configuration for barcode scanners.
Details the navigation options within the K-DUCER main menu.
Configures target torque and final speed parameters.
Sets ramp acceleration and run time for the screwdriver.
Configures reverse speed and pre-tightening reverse.
Details 24V I/O signals for control and data acquisition.
Provides recommendations for tool calibration intervals.