Kolver K-DUCER User Manual

Vers. 062721 31
PROGRAMS menu
Programs represent batches of one or more screws sharing the same parameters (torque,
angle, speed, etc). With the K-DUCER series, you can define up to 64 different programs as
well as assign a barcode to each for automatic selection with a barcode scanner.
Tap the Programs button from the main menu to enter the programs menu.
Select one of 64 programs to edit by tapping on the program number or the arrows on the
top bar.
Enter one of the four sub-menus to modify the desired parameters for the program selected.

Kolver K-DUCER Specifications

General

Brand	Kolver
Model	K-DUCER
Category	Laboratory Equipment
Language	English