Kolver K-DUCER User Manual

Vers. 062721 5
INTRODUCTION
K-DUCER is the new class A intelligent transducerized assembly system from Kolver.
Thanks to a sophisticated control system, the electronic circuit communicates with KDS
series screwdriver equipped with integrated torque/angle transducer and allows to stop the
screwdriver instantly when reaching the preset torque or angle.
The AC 90÷260V - 50÷60Hz power supply is converted into 40VDC required by the KDS
series screwdrivers through a switching board.
IMPORTANT: K-DUCER is a highly accurate unit but it is critically important to select the
appropriate settings to ensure that the desired and proper torque is being applied and that
the screwdriver motor works efficiently. Read the menu description carefully and if unsure
please contact Kolver for support.
MODELS
K-DUCER power supply and control units are available in two versions:
Code
Model
Features
035001
KDU-1
035001/A
KDU-1A
as KDU-1 + RJ45 connector, provoding
Modbus TCP (server) communication
protocol and Open Protocol v1.6rev3
K-DUCER units are compatible with any of the KDS electric screwdrivers with transducer,
available in straight, pistol and fixture configuration.
Code
Model
Torque
(Nm)
Speed (rpm)
Min
Max
175015
KDS-MT1.5
0,1-1,5
50
850
175015/ESD
KDS-MT1.5/ESD
0,1-1,5
50
850
175016/ESD
KDS-MT1.5P
0,1-1,5
50
850
175016/U/ESD
KDS-MT1.5P/U
0,1-1,5
50
850
175115
KDS-MT1.5CA
0,1-1,5
50
850
175115/FN
KDS-MT1.5CA/FN
0,1-1,5
50
850
175015/A
KDS-MT1.5ANG
0,1-1,5
50
850
135006
KDS-PL6
0,5-6
50
850
135006/ESD
KDS-PL6
0,5-6
50
850

Kolver K-DUCER Specifications

General

Brand	Kolver
Model	K-DUCER
Category	Laboratory Equipment
Language	English