Kolver mini K1/S User Manual

Vers. 140323 rev
1. APPLICATIONS
Recommended for all static and dynamic calibration of electric and pneumatic screwdrivers,
wrenches and power tools.
2. FEATURES
Model
Code
Torque
Range Nm
Accuracy
Transducer
MINI K1/S
021402/S
0,1 – 1
± 1 cNm
Built-in
MINI K5/S
021403/S
0,3 – 5
± 2 cNm
Built-in
MINI K20/S
021404/S
0,5 – 20
± 3 cNm
Built-in
MINI KEF1
021405/F1
0,1 – 1
± 1 cNm
MINI KE + KT1
MINI KEF5
021405/F5
0,3 – 5
± 2 cNm
MINI KE + KT5
MINI KEF20
021405/F20
0,5 – 20
± 3 cNm
MINI KE + KT20
MINI KEF50
021405/F50
2 – 50
±10 cNm
MINI KE + KT50
MINI KEF100
021405/F100
5 – 100
±10 cNm
MINI KE + KT100
MINI KE/5/S
021405/5/S
0,5 – 5
± 3 cNm
MINI KE + KTE5
MINI KE/25/S
021405/25/S
2 – 25
±10 cNm
MINI KE + KTE25
MINI KE/50/S
021405/50/S
5 – 50
± 10 cNm
MINI KE + KTE50
MINI KE/100/S
021405/100/S
10 – 100
± 20 cNm
MINI KE + KTE100
▪ Built-in transducer to measure on joint simulator (MINI K.../S)
▪ External transducer to measure on joint simulator (MINI KEF…)
▪ External rotary transducer to measure the real torque being applied from the tool (MINI KE/…/S)
▪ Three units of torque measurements: Nm, Kgf.cm, lbf.in.
▪ Manual and auto reset functions to clear displayed values
▪ Battery powered (9V)
▪ AC adapter cord (12V, 500mA, 6W, external +, cylindrical jack, hole 2,5 mm and 5,5mm external)
▪ Correction factor (FATC): to connect more ext. transducers on the same tester
▪ Mini USB to connect to PC and to communicate to Torque Analyzer
▪ Certificate of calibration
▪ Automatic shut down

Kolver mini K1/S Specifications

General

Brand	Kolver
Model	mini K1/S
Category	Laboratory Equipment
Language	English