P2-18 Lubrication and Service 10/06 P02050
10,000 HOUR MAINTENANCE CHECKS
Maintenance for every 10, 250, 500, 1,000, 2,500 & 5000 hour Lubrication and Maintenance Checks should also
be performed at this time.
NOTE: “Lube Key” references are to the lubrication chart.
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
1. WHEEL MOTORS - Clean the area around the
grease ports to prevent dirt or other contaminates
from entering. Remove the six grease port plugs on
each wheel motor. Grease the inboard and outboard
wheel hub bearings with one 14 oz. cartridge per
each grease port.
To Next Page
Loading...
