Komatsu AE50 - Page 32

E-7
Materials Handling System Monitoring 1 Item
Monitoring Item Content of Function Range Normal Value Remark
Lift1 Switch To display [1] when operating lift control lever.
0: OFF
1: ON
-
Lift2 Switch To display [1] when operating lift control lever.
0: OFF
1: ON
-
Tilt Switch To display [1] when tilting mast.
0: OFF
1: ON
-
ATT1 Switch To display [1] when operating ATT1 lever.
0: OFF
1: ON
-
ATT2 Switch To display [1] when operating ATT2 lever.
0: OFF
1: ON
-
ATT3 Switch To display [1] when operating ATT3 lever.
0: OFF
1: ON
-
Lift Interrupt Flag
To display [1] when BDI shows less than 20%
operating under limited state of traveling and
materials handling.
1: ON - (BDI: less than 20%)
Pump Motor Rotation Speed To display rotation speed of pump motor.
0 - +3500
(rpm)
-
Pump Motor Inside
Temperature
To display temperature inside pump
motor.
0 - 200
(deg C)
0 - 160
(deg C)
Warning: 163 deg C
Abnormal: 175 deg C
Pump Motor Controller Inside
Temperature
To display temperature inside pump
motor controller.
0 - 200
(deg C)
0 - 105
(deg C)
Warning: 108 deg C
Abnormal: 130 deg C