Tilting operation
(E) LEFT tilt
Blade tilts leftward.
(B) HOLD
Blade is stopped and held in this position.
(F) RIGHT tilt
Blade tilts rightward.
Machine
model
Tilting amount ( mm)
Narrow blade Width blade High capacity
blade
D51EX 425 470 –
D51PX – 470 470
Angling operation
Operate
angle switch (L) forward and backward to angle the
blade.
(G) LEFT angle
Blade is angled leftward.
(B) HOLD
Blade is stopped and held in this position.
(H) RIGHT angle
Blade is angled rightward.
REMARK
• If the angling operation is performed while the blade con-
trol lever is not in HOLD position (while either or both of
lifting and tilting operations are performed), all of those op-
erations can be continued, but the moving speed of the
blade is lowered.
Select the operations according to the type of operation.
• If the lifting or tilting operation is performed while angling
operation is performed, the machine moves similarly to the
above.
EXPLANATION OF COMPONENTS OPERATION
3-88
To Next Page
Loading...
