2.
Set
the parking brake lever (2) and work equipment lock
lever (3) to LOCK positions (L).
3.
Remove the mounting bolts (8 pieces), and remove the
covers (4) and (5).
4.
Open the engine side cover (6).
5.
Remove the front cover (7) and engine side covers (8) and
(9).
6.
Open the hydraulic tank inspection cover (10).
7.
Open the fuel tank inspection cover (11).
8.
Turn the starting switch (1) to ON position.
9.
With the user menu on the machine monitor, set “Machine
Setting” to the Fan Reverse Mode.
For
setting of the Fan Reverse Mode, see “REVERSE HY-
DRAULIC FAN”.
MAINTENANCE PROCEDURE MAINTENANCE
4-30
To Next Page
Loading...
