4 5
SIGMADOZER – The next generation blade
Based on a completely new digging theory, SIGMADOZER
dramatically improves dozing performance and increases
productivity. A new frontal design concept adopted for
digging and rolling up at the center of the blade increases
soil holding capacity while simultaneously reducing sideway
spillage. It also reduces digging resistance producing a
smoother flow of earth, enabling the dozing of larger
quantities of soil with less power.
Outstanding productivity
New fuel efficient bulldozer
The new D65 has achieved both high levels of
productivity and fuel economy through the usage of
SIGMADOZER and automatic transmission with
lockup torque converter. SIGMADOZER developed
based on completely new digging theory dramatically
increases production. New transmission with high
power transmission efficiency greatly reduces fuel
consumption. This bulldozer significantly improves
fuel efficiency compared with our conventional model.
Lockup mechanism of the
torque converter is
automatically actuated to
transfer engine power directly
to the transmission in
travelling and usual dozing
speed ranges. Locking up the
torque converter eliminates
loss of power by 10%.
Because the electronically
controlled engine is extremely
efficient, a decrease in fuel
consumption is realized while
also maintaining machine
power.
Automatic transmission with lockup torque
converter
A sharp reduction in fuel consumption and greater power
train efficiency is achieved by the new automatic gearshift
transmission and lockup torque converter. The automatic
transmission selects the optimal gear range depending on
the working conditions and load placed on the machine.
This means the machine is always operating at maximum
efficiency.
Fuel consumption decreased by
10%
(compared with our conventional model)
Outstanding fuel economy
Automatic/manual gearshift selectable mode
Automatic or manual gearshift modes can be selected with ease to suit the work at hand by simply pressing the switch on
the multi-monitor (selection at neutral).
● Automatic gearshift mode
Select for all general dozing. When a load is applied, the transmission automatically shifts down, and when the load is off,
it automatically shifts up to a set maximum gear speed. This mode economizes both fuel and production further where the
torque converter lockup mechanism is actuated according to load, providing a one to one drive.
● Manual gearshift mode
Select for dozing and ripping rough ground. When loaded, the transmission automatically shifts down, but does not shift up
when the load is off.
Selectable working mode
Working mode P is the mode aiming for powerful operation and maximum production and mode E for general dozing
applications with adequate speed and power while saving energy. For CO
2 reduction and energy saving, the monitor panel
allows for switching the working mode with ease, depending on the work at hand.
● P mode (Power mode)
With P mode, the engine outputs its full power, allowing the machine to perform the work requiring large production,
heavy-load work, and uphill work.
● E mode (Economy mode)
With E mode, the engine outputs enough power for the work without delivering unnecessary power. This mode allows for
energy saving operation and is suitable for the work on a ground where the machine may cause shoe slip and the work
not requiring large power such as downhill dozing, leveling and light-load work.
Automatic gearshift
mode screen
Manual gearshift
mode screen
WA380-6
P
RODUCTIVITY &
F
UEL
E
CONOMY
F
EATURES
D65-16
CRAWLER DOZER
D65EX/PX/WX-16 C RAWLER D OZER
To Next Page
Loading...
Need help?
General
