www.Komatsu.com Printed in Japan 200701 IP.AD.SIN (10)
CEN00215-00 Materials and specifications are subject to change without notice
is a trademark of Komatsu Ltd. Japan
HORSEPOWER
Gross: 127 kW
170 HP @ 1850 rpm
Net: 125 kW 168 HP @ 1850 rpm
OPERATING WEIGHT
D61EX-15E0 16710 kg
36,840 lb
D61PX-15E0 18710 kg 41,250 lb
CRAWLER DOZER
Photo may include optional equipment.
D61EX-15E0
D61PX-15E0
D
61
STANDARD EQUIPMENT FOR BASE MACHINE
● Air cleaner, double element with
dust indicator
● Alternator, 60 ampere
● Backup alarm
● Batteries, 170 Ah/12V x 2
● Decelerator pedal
● Electronic instrument monitor panel
● Engine hood and gull-wing side covers
● Fenders
● Floor mat
● Front pull hook
● High mount footrests
● HSS hydrostatic steering system
● Hydraulic drive radiator cooling fan with
clean mode
● Hydraulics for Power Angle Tilt dozer
● Lighting system, (includes 2 front, 1 rear)
● Locks, filler caps and covers
● Muffler with curved exhaust pipe
● Palm Command Control System (PCCS)
● Radiator reserve tank
● Rain Cap (Intake air)
● Rear cover
● Rear view mirror
● ROPS mounting brackets
● Starting motor, 5.5 kW/24V
● Suspension seat, reclining with vinyl
material
● Tr ack roller guard, center section
(EX long track, PX)
● Tr ack roller guard, end sections
● Tr ackshoe assembly:
—Sealed and lubricated track
● 600 mm 24" single grouser
shoe (EX)
● 860 mm 34" single grouser
shoe (PX)
● Underguards, engine and transmission
● Water separator
ROPS CANOPY (without cab)
● Meets ISO 3471, SAE J/ISO 3471
ROPS standards, and ISO 3449 FOPS
standard.
● Roof dimensions:
—Length: 1830 mm 6'0"
—Width: 1825 mm 6'0"
—Height from operator compartment
floor: 1670 mm 5'6"
OPTIONAL EQUIPMENT
● Cab
Cab accessories:
—Cup holder
—Lunch box holder
—12V Power supply
—Sun Visor
● AM/FM Radio with cassette
● Air conditioner
● Heater and defroster
● Suspension seat, reclining with
fabric material (cab only)
● Suspension seat, with high back
● Seat, air suspension with high back
(cab only)
● Seat belt, retractable
● Hitch, deluxe
● Intake pipe with precleaner
● Hydraulics for ripper (EX)
● Long track arrangement (EX)
● ROPS canopy
● ROPS for cab
● ROPS canopy with sweep
● Light, working, cab additional
● Light, rear working (ROPS canopy,
additional)
● Tr ack guard, full length
● AR track assembly
(abrasion resistant bushings)
● Underguard, heavy-duty
● Vandalism protection cover
for instrument panel
CAB
● Additional weight 490 kg 1080 lb
● All-weather, enclosed pressurized cab
Meets ISO3449 FOPS Standard.
● Dimensions:
—Length: 1760 mm 5'9"
—Width: 1325 mm 4'4"
—Height: 1595 mm 5'3"
—Height from floor to ceiling:
1545 mm 5'1"
ROPS FOR CAB
● Additional weight 240 kg 530 lb
● Meets ISO 3471, SAE J/ISO 3471
ROPS standards.
● Dimensions:
—Length: 530 mm 1'9"
—Width: 1650 mm 5'5"
MULTI-SHANK RIPPER (EX)
● Additional weight (including hydraulic
control unit): 1645 kg 3,630 lb
● Beam length: 2170 mm 7'1"
●
Maximum digging depth: 665 mm 2'2"
●
Maximum lift above ground: 565 mm 1'10"
Models Shoe Additional weight
Ground contact Additional ground
area pressure to tractor
860 mm 34"
-400 kg 54520 cm
2
-1.0 kPa
D61PX circular-arc
-880 lb 8,451 in
2
-0.01 kg/cm
2
shoe -0.14 psi
SHOES
Need help?
To Next Page
General
