OPTIONAL EQUIPMENT
STANDARD EQUIPMENT FOR BASE MACHINE
Photo may include optional equipment.
www.Komatsu.com Printed in Japan 200809 IP.AD (10)
CEN00338-01(P)
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
HORSEPOWER
Gross: 127 kW
170 HP @ 1800 rpm
Net: 116 kW 155 HP @ 1800 rpm
OPERATING WEIGHT
18500 kg
40,790 lb
D
63E
D63E-12
● Air cleaner, double element with
dust indicator
● Alternator, 35 ampere/24V
● Backup alarm
● Batteries, 140 Ah/2 x 12V
● Blower cooling fan
● Decelerator pedal
● Engine hood
● Engine side covers, gull-wing
● Fenders
● High mount foot rests
● Joystick steering
● Lighting system, (includes 2 front, 1 rear)
● Muffler with curved exhaust pipe
● Pre-cleaner
● Pressure check ports for power train
● Radiator mask hinged (Heavy duty)
● Radiator reserve tank
● Rear cover
● Segment sprocket
● Starting motor, 11.0 kW/24V
● Suspension reclining seat
● Tr ack roller guard, end sections
● Tr ack shoe assembly
—Heavy-duty sealed and lubricated track
—510 mm 20.1" single grouser shoe
● Additional rear light
● Air conditioner
● Air intake and exhaust pipe extension
● Canvas canopy
● Drawbar
● Dust-proof grille
● Electric dust indicator
● Fire extinguisher
● Hardened pulley
● Heater and defroster
● Panel cover and lock
● Seat belt (78mm 3")
● Steel fan (Engine output; net 150 HP
when installed)
● Supplementary air heater
● Webasto heater kit
SHOES
Shoe Additional weight
Ground contact
area
560 mm 22"
+120 kg 30520 cm
2
single-grouser
+265 lb 4,731 in
2
shoe
610 mm 24.0"
+240 kg 33245 cm
2
single-grouser
+530 lb 5,153 in
2
shoe
MULTI-SHANK RIPPER
● Additional weight (including hydraulic
control unit): 1645 kg 3,630 lb
● Beam length: 2170 mm 7'1"
●
Maximum digging depth: 655 mm 2'2"
●
Maximum lift above ground: 575 mm 1'10"
STEEL CAB
● Additional weight 285 kg 630 lb
● All-weather, enclosed pressurized cab
● Dimensions:
—Length: 1765 mm 5'9"
—Width: 1720 mm 5'8"
—Height: 1625 mm 5'4"
—Height from floor to ceiling:
1515 mm 5'0"
ROPS CANOPY FOR CAB
● Additional weight 250 kg 550 lb
● Meets ISO 3471, SAE J/ISO 3471 ROPS
standards, and ISO 3449 FOPS
standard.
● Roof dimensions:
—Length: 1270 mm 4'2"
—Width: 1490 mm 4'11"
—Height from operator compartment
floor: 1705 mm 5'7"
SINGLE SHANK RIPPER
● Additional weight 1260 kg 2780 lb
● Beam length 964 mm 3
'
2"
●
Maximum digging depth: 655 mm 2'2"
●
Maximum lift above ground: 575 mm 1'10"
C
RAWLER
D
OZER
To Next Page
Need help?
General
