LOCK
Position to be locked
Always lock the following positions.
(1) Operator's cab door
Always close the window.
(2) Fuel tank filler port cap
(3) Hydraulic tank oil filler cap
(4) Battery box cover
(5) Engine room door (3 places)
(6) Left side door of the machine
(7) Tool storage door
(8) Reservoir tank inspection cover
(9) Maintenance floor entrance door
REMARK
The starting switch key can be used for above positions except
for (2).
Use the lock (A) for the fuel tank filler port cap.
METHOD FOR OPENING AND CLOSING CAP WITH LOCK
PROCEDURE FOR OPENING CAP WITH LOCK
1.
Insert the key into the key slot.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-195
To Next Page
Loading...
