.
OPERATION
TROUBLES AND ACTIONS
TOWING THE MACHINE
WARNING
When towing the machine, use a wire rope that has ample strength for the weight of the machine that is being towed.
Do not apply a sudden load to the wire rope.
If the machine sinks in mud and cannot get out under its own
power, or if the drawbar pull of the excavator is being used to tow
a heavy object, use a wire rope as shown in the diagram on the
right.
Place pieces of wood between wire ropes and body to prevent
damage to ropes and body.
At this time, never use the hole for light-weight towing.
SEVERE JOB CONDITION
When carrying out digging operations in water, if the work equipment mounting pin goes into the water, carry out
greasing every time the operation is carried out.
For heavy-duty operations and deep digging, carry out greasing of the work equipment mounting pins every time
before operation.
After greasing, operate the boom, arm and bucket several times, then grease again.
3 - 137
To Next Page
Loading...
