Komatsu PC2000 User Manual

Komatsu PC2000 SNM940 Installation Guide
1. Mount the Wi-Fi and Cell/GPS antenna on the front left corner of the operator’s top catwalk.
Run the antenna cables under the catwalk and in through the existing grommet into the room
under the operator’s station.
2. Mount the SNM940 on the left wall of the room located under the operator’s station.

Komatsu PC2000 Specifications

General

Brand	Komatsu
Model	PC2000
Category	Construction Equipment
Language	English

Summary

SNM940 Antenna and Unit Mounting

Mount Wi-Fi and Cell/GPS Antenna

Mount the Wi-Fi and Cell/GPS antenna on the front left corner of the operator's top catwalk. Run cables.

Mount SNM940 Unit

Mount the SNM940 on the left wall of the room located under the operator's station.

SNM940 Grounding and Power Connection

Ground SNM940

Ground the SNM940 to a weld boss, ensuring paint is removed from the contact surface.

Run Power Leads

Run battery and key switch power leads into the electrical panel to the left of the SNM940.

SNM940 Breaker Panel Connections

Connect to Breaker Panel

Connect key switch power to Head Light Right breaker and battery power to Key VHMS Controller breaker.

SNM940 Harness Connection

Connect Loadrite Harness

Connect the Loadrite harness to the SNM940 harness, modifying the Deustch wedge on the SNM940 side.