Komatsu PC210LC-10 Service Manual

CEAM026502
Operation & Maintenance
Manual
PC210LC -10
HYDRAULIC EXCAVATOR
SERIAL NUMBERS PC210LC-10 A10001 and up
ENGINE 6D107E-2
This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in
accordance with written authorization from Komatsu America Corp.
It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to make
changes or improvements at any time without incurring any obligation to install such changes on products sold
previously.
Due to this continuous program of research and development, revisions may be made to this publication. It is
recommended that customers contact their distributor for information on the latest revision.
Copyright 2016 Komatsu
Printed in U.S.A.
Komatsu America Corp.
March 2016

Komatsu PC210LC-10 Specifications

General

Brand	Komatsu
Model	PC210LC-10
Category	Excavators
Language	English

Summary

Introduction to the Operation & Maintenance Manual

Forward and General Information

Details the manual's purpose, fundamental safety rules, and general operation advice.

Safety Information and Signal Words

Explains the use of signal words (Danger, Warning, Caution) and the safety alert symbol.

Machine Directions and Operator Protection

Describes machine directions, operator visibility, and the structure to protect the operator (ROPS).

Product and Break-in Information

Covers breaking-in procedures for new machines and product identification details.

Machine Details and Acronyms

Lists service meter location, distributor information, and engine acronyms.

Safety Precautions and Warnings

Safety Labels Overview

Explains the types, purpose, and importance of safety labels affixed to the machine.

General Operation and Maintenance Safety

Cautions for operation, inspection, maintenance, and safe practices when leaving the operator's seat.

Electrical, Window, and Pattern Safety

Warnings regarding electric cables, front windows, and control pattern selection safety.

Temperature, Pressure, and Track Tension Safety

Details warnings for hot fluids, high pressure, and safe track tension adjustment.

Cable, Rotation, and Falling Hazards

Covers safety during cable handling, stopping rotation for maintenance, and preventing falls.

Swinging, Reverse Travel, and Swing Area Safety

Warns about hazards during swinging, reverse travel, and operating within the swing radius.

Battery, Fuel, and Blast Site Safety

Highlights dangers associated with batteries, fuel pressure, and blast zones.

Hot Components and Ether Usage Warnings

Cautions about hot engine parts and the risks of using ether for starting.

Operating Patterns, ROPS, and STS Safety

Covers changing operating patterns, ROPS, no-step areas, and Straight Travel System (STS) safety.