5-28
PC210/240-ENG
30.3 FORK GRAB
MAIN FIELDS OF APPLICATION
° Disposing of industrial waste
° Disposing of demolition waste
This can be used for a wide range of work including collecting or
loading demolition waste materials and debris, timber, grass.
MISTAKEN METHODS OF USE
To ensure that the machine has a long life, and to ensure that opera-
tions are carried out in safety, do not operate the machine in ‘ any of the
following ways.
• Do not operate the cylinder to the end of its stroke.
Always leave approx. 5 cm (2 in) to spare.
Operations using the swing force
Operations using one side of work equipment
Pushing fork into ground surface to jack up and change direction of ma-
chine
Impact operation with no load
30. EXTENDING MACHINE SERVICE LIFE
5-26
To Next Page
Loading...
Need help?
General
