.
MAINTENANCE
MAINTENANCE PROCEDURE
CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUBBER
Check clamp (1) visually and touch by hand to check that there are no loose bolts or hardening of the rubber. If there
are any loose bolts or hardened rubber, please contact your Komatsu distributor for replacement.
CHECK FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER
Check that there are no missing fuel spray prevention caps (1) - (14) and that there is no hardening of the rubber.
If there are any missing caps or hardened rubber, please contact your Komatsu distributor for replacement.
4 - 80
To Next Page
Loading...
Need help?
General
