Komatsu PC360LCi-11 User Manual

CEAM032703
Operation & Maintenance
Manual
PC360LCi -11
PC390LCi -11
HYDRAULIC EXCAVATOR
SERIAL NUMBERS PC360LCi-11 A38001 and up
PC390LCi-11 A31001 and up
ENGINE
6D114E-6
This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in
accordance with written authorization from Komatsu America Corp.
It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to make
changes or improvements at any time without incurring any obligation to install such changes on products sold
previously.
Due to this continuous program of research and development, revisions may be made to this publication. It is
recommended that customers contact their distributor for information on the latest revision.
Copyright 2019 Komatsu
Printed in U.S.A.
April 2019 Komatsu America Corp.

Komatsu PC360LCi-11 Specifications

General

Brand	Komatsu
Model	PC360LCi-11
Category	Excavators
Language	English

Summary

SAFETY INFORMATION

SAFETY

OPERATION

MAINTENANCE

INTELLIGENT MACHINE CONTROL SETTINGS

CONTROL BOX

EXECUTIONS

SEMI-AUTO MODE

PRECAUTIONS FOR OPERATION

Provides critical safety guidelines and warnings for operating the semi-auto mode to prevent injury or machine damage.

ROUGH DIGGING MODE

METHOD FOR SETTING ROUGH DIGGING SCREEN

FINE DIGGING MODE

METHOD FOR SETTING FINE DIGGING MODE SCREEN

TARGET SURFACE SETTINGS

BUCKET EDGE POSITION

DISPLAY BUCKET EDGE POSITION

METHOD FOR SETTING MEASURED BUCKET EDGE POSITION

DAILY CALIBRATION

WALK-AROUND CHECKS OF INTELLIGENT MACHINE CONTROL EQUIPMENT

Daily pre-operation inspection checklist for the intelligent machine control system components.

METHOD FOR CHECKING GNSS ANTENNA AND CABLE

METHOD FOR CHECKS BEFORE STARTING ON intelligent Machine Control EQUIPMENT

Pre-operation checks to ensure the intelligent Machine Control system is correctly detecting the bucket edge position.

TROUBLESHOOTING

CONTROL BOX SCREEN DISPLAY

Troubleshooting guide for issues related to the control box screen display, including design data and rotation errors.

WORKING ACCURACY

The value varies largely when checking or adjusting the accuracy of bucket edge.

Finishing accuracy is poor.

Guidance on addressing poor finishing accuracy, including design data errors and GNSS signal issues.