When the Surfaces are already saved in the Project File, the
list of the Surface names is displayed in
“Surface” column.
When the Surface is not saved in the Project File, no name is
displayed in the column. Create the Surface newly or import
the Surface.
Highlight and tap the Surface to be configured in “Surface” col-
umn.
Return to the working screen, and the Surface is displayed.
Not to display the Surface, highlight and tap “<None>”. Even if
you return to the working screen, the Surface is not displayed.
METHOD FOR SETTING ALIGNMENT
You can perform the setting of the Alignment.
When the Surfaces are already saved in the Project File, the Surface is displayed in the list of “Alignment”.
If the Surface is not saved in the Project File, the Surface is not displayed in the list. In this case, import the
Alignment.
Highlight and tap the Alignment to be set in the items of “Alignment”.
Return to the working screen, and Alignment is displayed.
Not to display the Alignment, highlight and tap “<none>”.
SETTING CONTROL BOX
7-27
To Next Page
Loading...
Need help?
General
