(E) Operator's seat (F) Sprocket
In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's seat
when the operator's seat is facing the front and the sprocket is at the rear of the machine.
VISIBILITY FROM OPERATOR'S SEAT
This machine complies with the visibility standard (ISO 5006).
This machine maintains a proximity visibility of a height of 1.5m at a point 1m away from the outside surface of
the machine and a visibility for a radius of 12m.
Protective structures
This machine is equipped with a structure to protect the operator (ROPS) conforming to ISO12117-2.
FOREWORD INTRODUCTION
1-9
To Next Page