Komatsu TB45 - Special Service Tools - Sensors and Coils; Service Parts Specifications

EG-20
PREPARATION
Service Parts
Piston oversize
0.5 mm (0.020 in) OS [0.5 mm (0.020 in) oversize]
1.0 mm (0.039 in) OS [1.0 mm (0.039 in) oversize]
Main bearing undersize
Heated oxygen sensor wrench
KV101 13700
Removing and installing heated
oxygen sensor
Maintenance tool
1. DIAGNOSIS KIT
SKVEE GY010
2. SOFT WARE
SKVEE GY100
For system inspection and
diagnosis
Check adapter V
EG1755 0000
(for SMJ 150-pin connector)
For control unit input/output signal
inspection
Harness adapter
EG1755 0200
(150-pin to 121-pin conversion adapter)
For molding coil
Adapter harness
EG101 17500
Checking engine speed
Special Service Tools (Cont'd)
Description Application Remarks
EGM0083
EGM0084
EGM0085
EGM0086
Unit: mm (in)
Size Thickness
STD 2.000 (0.0787)
US 0.25 (0.0098) 2.125 (0.0837)
US 0.50 (0.0197) 2.250 (0.0886)
US 0.75 (0.0295) 2.375 (0.0935)
US 1.00 (0.0394) 2.500 (0.0984)