.
OPERATION
OPERATION
PARKING MACHINE
WARNING
Avoid stopping suddenly. Give yourself ample room when stopping.
Do not park the machine on slopes.
If the machine has to be parked on a slope, set it facing directly down the
slope, then dig the bucket into the ground and put blocks under the tires
to prevent the machine from moving.
If the control lever is touched by accident, the work equipment or the
machine may move suddenly, and this may lead to a serious accident.
Before leaving the operator's compartment, always set the work
equipment lock lever securely to the LOCK position.
Even if the parking brake switch is turned ON, there is danger until the
parking brake pilot lamp lights up, so keep the brake pedal depressed.
NOTICE
Never use the parking brake switch to brake the machine when traveling
except in an emergency. Apply the parking brake only after the machine
has stopped.
1. Release accelerator pedal (1), then depress brake pedal (2) to
stop the machine.
2.
Place directional lever (3) in N (neutral) position.
3 - 137
To Next Page
Loading...
Need help?
General
