To Next PageTo Next Page
Need help?Do you have a question about the Komatsu WA480-8 and is the answer not in the manual?
General| Brand | Komatsu |
|---|---|
| Model | WA480-8 |
| Category | Compact Loader |
| Language | English |
Guidance on how to use and understand the operation and maintenance manual for safe operation.
Information regarding compliance with relevant EU directives for machinery.
Details on the processing of personal data collected through machine monitoring systems.
Information on the noise emission levels produced by the machine, measured according to ISO standards.
Details on vibration levels transmitted from the operator's seat and guides to reduce vibration.
Details the primary work applications for which this Komatsu machine is designed.
Information on machine visibility standards and proximity visibility from the operator's perspective.
Explanation of KDPF and Urea SCR systems for EU Stage IV emission compliance.
Details the location of the machine's serial number and product identification plate.
Specifies the location of the engine number plate for identification purposes.
Indicates the location of the ROPS/FOPS serial plate for safety structure identification.
Provides space to record machine serial numbers and distributor contact information.
Details compliance with the Machine Directive 2006/42/EC.
Details compliance with the EMC Directive 2014/30/EU.
Details compliance with the Outdoor Noise Directive 2000/14/EC.
Details compliance with the Radio Equipment Directive 2014/53/EU.
General safety guidelines to be followed during operation, inspection, and maintenance.
Guidelines to prevent fires caused by fuel, oil, coolant, electrical wiring, or other materials.
Safe procedures for mounting and dismounting the machine using handrails and steps.
General safety guidelines and warnings for operating the machine safely on various job sites.
General safety guidelines and precautions before performing inspection and maintenance.
Daily checks and adjustments to ensure proper operation before starting the engine.
Maintenance tasks to be performed every 250 operating hours.
Maintenance tasks to be performed every 1000 operating hours.
Technical specifications for the WA480-8 Wheel Loader, including weight, dimensions, and power.
Specifies the maximum allowable towing load for the machine in kN and kg.
Details the maximum travel speeds for forward and reverse gears with torque converter lock-up engaged.
Guidance on selecting suitable buckets and tires based on operation type and job site conditions.
Explanation of the multifunction mono-lever and its associated controls for boom and bucket operation.
Description of the kickdown switch function for increasing rim pull during scooping or changing power modes.
List of safety-critical parts requiring periodic replacement regardless of condition.
List of consumable parts like filters and elements with their part numbers and replacement intervals.
Explanation of symbols used in the lubrication chart for points and types of lubricant.
Guidelines for selecting fluids based on ambient temperature to ensure proper machine operation.
