What should I do if the supply fan drive fails in my Komfovent Portable Generator?
If the supply fan drive fails in your Komfovent Portable Generator, it means a fault signal has been received from the supply fan drive. Check the supply fan drive and its messages.
Why is the electric heater off on my Komfovent Portable Generator?
The electric heater in your Komfovent Portable Generator might be off because it was disconnected due to low air volume. Once the heater cools down, the protection will reset automatically. It is recommended to increase the ventilation intensity level.
How to fix low supply air flow in my Komfovent Portable Generator?
If you're experiencing low supply air flow in your Komfovent Portable Generator, it could be due to high resistance in the ventilation system. Check the pressure pipes, air dampers, and air filters to ensure that the ventilation system is not blocked.
What causes low extract air flow in a Komfovent Portable Generator, and how can I fix it?
Low extract air flow in your Komfovent Portable Generator is often caused by high resistance in the ventilation system. To resolve this, check the pressure pipes, air dampers, and air filters to ensure that the ventilation system is not blocked.
How do I change the outdoor air filter on my Komfovent Portable Generator?
If your Komfovent Portable Generator indicates it's time to change the outdoor air filter, it likely means the fresh air filter is blocked. To resolve this, shut down the unit and replace the filter.
What should I do if the rotor motor fails in my Komfovent Portable Generator?
If the rotor motor fails in your Komfovent Portable Generator, it means the rotor motor is broken. Check the rotor motor and replace it if necessary.
What causes the supply fan drive to overload in my Komfovent Portable Generator?
If the supply fan drive is overloaded in your Komfovent Portable Generator, check the condition of the supply fan drive and its cooling.
Why is the exhaust fan drive overloading in my Komfovent Portable Generator?
If the exhaust fan drive is overloaded in your Komfovent Portable Generator, check the condition of the exhaust fan drive and its cooling.
Why is the supply air temperature low in my Komfovent Portable Generator?
A low supply air temperature in your Komfovent Portable Generator indicates that the heating equipment is not operating correctly or its capacity is insufficient. Check the heating equipment.
What to do if the supply fan motor fails in my Komfovent Portable Generator?
If the supply fan motor fails in your Komfovent Portable Generator, it means the supply fan is broken. Check the supply fan and replace it if necessary.
General| Brand | Komfovent |
|---|---|
| Model | VERSO-S |
| Category | Portable Generator |
| Language | English |
To Next Page
