What causes the supply fan drive to overload in my Komfovent Portable Generator?
If the supply fan drive is overloaded in your Komfovent Portable Generator, check the condition of the supply fan drive and its cooling.
What does it mean when the return water temperature is low in my Komfovent Portable Generator?
A low return water temperature in your Komfovent Portable Generator indicates that the return water temperature of the heater has dropped below the permissible limit. Check the status and operation of the circulation pump, heating system, and mixing valve actuator.
Why is the exhaust fan motor overloading in my Komfovent Portable Generator?
The exhaust fan motor in your Komfovent Portable Generator can overload if the exhaust fan is overloaded. Check the condition of the exhaust fan and make sure that the resistance of the ventilation system is not exceeded.
What causes the supply fan motor to overload in my Komfovent Portable Generator?
The supply fan motor in your Komfovent Portable Generator can overload if the supply fan is overloaded. Check the condition of the supply fan and ensure that the resistance of the ventilation system is not exceeded.
What to do if my Komfovent Portable Generator compressor fails?
If the compressor on your Komfovent Portable Generator fails, there are several potential causes and solutions: * **No power supply:** Check the supply voltage on the circuit breaker and ensure it is on. * **Supply voltage mismatches:** Verify that the supply voltage is present on all three phases. If necessary, swap the positions of the two-phase conductors. * **Compressor motor failure:** Inspect the compressor motor and replace it if needed. * **Compressor drive failure:** Examine the operation of the compressor drive and replace it if necessary.
What causes high supply air temperature in my Komfovent Portable Generator?
High supply air temperature in your Komfovent Portable Generator can occur if the heating equipment is not controllable, such as a blocked mixing valve or contactor. Check the heating equipment.
Why is the supply air temperature low in my Komfovent Portable Generator?
A low supply air temperature in your Komfovent Portable Generator indicates that the heating equipment is not operating correctly or its capacity is insufficient. Check the heating equipment.
What should I do if the exhaust fan motor fails in my Komfovent Portable Generator?
If the exhaust fan motor fails in your Komfovent Portable Generator, it indicates that the exhaust fan is broken. Check the exhaust fan and replace it if necessary.
What to do if the supply fan motor fails in my Komfovent Portable Generator?
If the supply fan motor fails in your Komfovent Portable Generator, it means the supply fan is broken. Check the supply fan and replace it if necessary.
What causes heat exchanger failure in my Komfovent Portable Generator?
Heat exchanger failure in your Komfovent Portable Generator can be caused by a blocked or non-rotating rotor, or a bypass damper failure. Check the rotor drive, replace the belt, or check the bypass channel operation.
General| Brand | Komfovent |
|---|---|
| Model | VERSO-S |
| Category | Portable Generator |
| Language | English |
To Next Page
