Innovative technology only for a better vision world
Hunan Bowan Technology Co.,Ltd. www.kommander.com.cn/en/
4. the playback status setting under the output window only takes effect on
the current output material
3.19Geometry correction
Introduction
When using projector as the output device, because of the characteristics of
the projection, the picture needs to be corrected. If there are multiple projection
outputs, the overlapping part needs to be fused. Kommander provides screen-based
correction and fusion settings.
Setting method
1. Screen management-choose a screen -geometry,and the following
window will pop up
To Next Page
Loading...