Innovative technology only for a better vision world
Hunan Bowan Technology Co.,Ltd. www.kommander.com.cn/en/
As you can see that it looks identical to Real-time, but actually what ever you do on Pre-
edit won’t affect current output. With that being said, you can load your plan into Pre-
edit and make changes and then save, by the time you call plan, all alterations are done.
If you need to save a new one when event is ongoing already, you can just edit here and
then save, go back to Real-time, you are free to call the saved plan.
3 Function
3.1 Audio Mapping
Introduction
In attributes- parameters, you will see something call audio mapping, this function
is used for cases that require more then one audio output to two or more speakers
individually, without one interfering another.
Setting method
1. In order to output two soundtracks at the same time, you need enter system
setting and change audio mode to multi-tone instead of mono-tone, if you
To Next Page
Loading...