C
castrostevenSep 4, 2025
Why is my Konica Minolta 7115 producing blurry copies?
- OoconnormichaelSep 4, 2025
If your Konica Minolta Copier is producing blurry copies, the paper might be damp. Change the paper.
To Next PageTo Next PageWhy is my Konica Minolta 7115 producing blurry copies?
If your Konica Minolta Copier is producing blurry copies, the paper might be damp. Change the paper.
Why does nothing happen when I press start on my Konica Minolta Copier?
If no copies are produced when you press the start key on your Konica Minolta Copier, it could be because an icon on the control panel is lit (take necessary action to correct the problem indicated by the lit icon) or the copier is still warming up (it takes about 30 seconds to complete warming up after it has been turned ON).
How to fix keys on the Konica Minolta Copier control panel that do not respond?
If the keys on the control panel of your Konica Minolta Copier do not respond, the Interrupt indicator might be lit. The copier is in an interrupt mode, so press the [INTERRUPT] key to leave the interrupt mode.
How to fix image alignment issues on the Konica Minolta Copier?
If the image on the copy from your Konica Minolta Copier is not aligned properly, it could be because the original is not placed in the correct position (place the original correctly on the Original Glass against the Original Width Scale), the original may not be suitable for use in the Automatic Document Feeder (raise the Automatic Document Feeder and place the original on the Original Glass correctly against the Original Width Scale), the Edge Guide and Trailing Edge Stop are not pressed up against the paper stack in the tray (slide the Edge Guide and Trailing Edge Stop up against the edges of the paper stack), or the paper has an excessive curl (smooth out curl in the paper and reload the paper stack in the tray).
Why does nothing show on the control panel of my Konica Minolta Copier?
If nothing is indicated on the control panel of your Konica Minolta Copier, the copier might be in Power Save mode (press any key on the control panel to leave the mode) or the Auto Shut OFF function has been activated (turn OFF, then ON, the Power Switch).
What to do if the paper is damp in my Konica Minolta Copier?
If the paper is damp in your Konica Minolta Copier, change the paper.
General| Brand | Konica Minolta |
|---|---|
| Model | 7115 |
| Category | Copier |
| Language | English |
