Konica Minolta bizhub 308e User Manual

bizhub 658e/558e/458e/368e/308e 5-23
5.5 When a message appears to replace consumables or carry out cleaning
5
5.5.5 Replacing a Saddle Staple Cartridge
Finisher FS-537 SD
Tips
- The figure shows the Finisher FS-537 SD equipped with Punch Kit PK-523, Z Folding Unit ZU-609,
and Relay Unit RU-513.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get
caught in the machine.
Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple
Cartridge is removed before the relevant message appears, it may result in a failure.
Saddle Stitcher
Saddle Staple Cartridge 1
Saddle Staple
Cartridge 2

Konica Minolta bizhub 308e Specifications

General

Category	Multifunction Printer
Printing Technology	Laser
Print Speed	Up to 30 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
Paper Capacity	250 sheets
Maximum Paper Size	A3
Duplex Printing	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, macOS, Linux
Display	7-inch Touchscreen
Copy Speed	30 pages per minute
Bypass Tray	Yes
Connectivity	USB, Ethernet