Konica Minolta bizhub 40p User Manual

Lower Feeder Unit
209
Installing the Lower Feeder Unit
Note
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
2 Place the feeder unit to be installed at the lower level on a flat location.
" If you install only one lower feeder unit, proceed to Step 6.
3 Lift up the feeder unit to be
installed at the higher level by
holding the parts as shown in the
figure.

Konica Minolta bizhub 40p Specifications

General

Print Speed	Up to 40 ppm
Print Resolution	1200 x 1200 dpi
Type	Monochrome Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal, Executive
PDL	PCL 6, PostScript 3