What to do if Konica Minolta All in One Printer feeds multiple sheets?
If your Konica Minolta All in One Printer feeds multiple sheets, it could be due to sheet edges not being aligned or the paper being damp. Remove the sheets, align their edges, and load them into the tray again. If the paper is damp, remove it and replace it with new, dry paper.
Why does the paper jam message persist on Konica Minolta Bizhub C3850?
The paper jam message on your Konica Minolta All in One Printer may persist because the machine needs to be reset, or a jammed paper remains inside. Try opening and closing the Right Door to reset the machine. Also, recheck the paper path to ensure all paper jams are cleared.
What to do if Konica Minolta Bizhub C3850 has paper jam in ADF?
If a paper jam has occurred in the ADF of your Konica Minolta All in One Printer, it might be due to an invalid original being used, the number of original pages exceeding the maximum capacity, or the width of the lateral guide not being adjusted to the size of the original. Remove excessive original pages on the ADF, then load them again. Also, adjust the lateral guide of the ADF to the size of the original.
What to do if Konica Minolta All in One Printer has paper jam during 2-sided printing?
A paper jam during 2-sided printing on your Konica Minolta All in One Printer could be caused by using invalid paper or an uncleared paper jam. Recheck the paper path, then check that all paper jams are cleared.
What to do if paper is damp in Konica Minolta All in One Printer?
If the paper is damp in your Konica Minolta All in One Printer, remove the damp paper and load new dry paper into the paper tray.
What to do if the number of sheets in the paper tray exceeds the maximum capacity in Konica Minolta All in One Printer?
If the number of sheets in the paper tray exceeds the maximum capacity in your Konica Minolta All in One Printer, remove excessive sheets and reload the paper into the paper tray.
What to do if bent or creased paper has been loaded into the paper tray of Konica Minolta Bizhub C3850?
If bent or creased paper has been loaded into the paper tray of your Konica Minolta All in One Printer, remove the bent or creased paper and load new paper into the paper tray.
What to do if paper is not loaded correctly in Konica Minolta Bizhub C3850 All in One Printer?
If paper is not loaded correctly in your Konica Minolta All in One Printer, remove the jammed paper and correctly load paper into the paper tray.
What to do if the paper guide has not adjusted to the paper size in Konica Minolta Bizhub C3850 All in One Printer?
If the paper guide has not been adjusted to the paper size in your Konica Minolta All in One Printer, adjust the paper guide in the paper tray to the paper size.
What to do if envelopes are loaded in Tray 2/3 of Konica Minolta Bizhub C3850 All in One Printer?
If envelopes are loaded in Tray 2/3 of your Konica Minolta All in One Printer, load them into Tray 1 or the Manual Feed Tray instead.
General| Brand | Konica Minolta |
|---|---|
| Model | Bizhub C3850 |
| Category | All in One Printer |
| Language | English |
Outlines prerequisites like network configuration and browser settings.
Details advanced functions and settings accessible by administrators.
Guides on setting up the machine for sending scanned documents via email.
Details on configuring the machine to send scanned data to shared folders via SMB.
Covers configuration for sending and receiving faxes via the Internet.
Details on setting up user authentication for MFP functions.
Explains different connection methods for printer driver installation.
Step-by-step guide for installing printer drivers using LPR/Port9100.
To Next Page