Konica Minolta bizhub C3100P User Manual (English)

Other manuals for Konica Minolta bizhub C3100P

Service Manual319 pages

Quick Guide48 pages

Questions and Answers:

H
hollyhawkinsAug 14, 2025
What to do if Konica Minolta Printer has a paper jam during 2-sided printing?
- H
  Heather YoderAug 15, 2025
  A paper jam during 2-sided printing on your Konica Minolta Printer can occur for several reasons. Make sure you are using the recommended paper type. Two-sided printing works best with plain or recycled paper of 15-15/16 to 23-15/16 lb (60 to 90 g/m2) or thick paper of 24-3/16 to 55-7/8 lb (91 to 210 g/m2). Specify the correct paper type using the printer driver. Avoid loading different paper types together and do not use envelopes, label sheets, postcards, glossy paper, or single-sided paper for 2-sided printing. Also, ensure that all previous paper jams are cleared by rechecking the paper path.
S
Stephanie WhiteAug 18, 2025
Where to load envelopes in Konica Minolta Printer?
- K
  Kelly GarciaAug 18, 2025
  If you're loading envelopes in Tray 1 or 2 of your Konica Minolta Printer, move them to the Manual Feed Tray instead.
P
Patrick BenitezAug 21, 2025
Where should I load thick paper in Konica Minolta Printer?
- P
  Patrick BrownAug 21, 2025
  If thick paper, label sheets, postcards, glossy paper, or letterheads are loaded in Tray 2 of your Konica Minolta Printer, relocate them to Tray 1 or the Manual Feed Tray.
L
Lawrence BarrAug 25, 2025
How to load envelopes correctly in Konica Minolta Printer?
- D
  deleonjenniferAug 25, 2025
  When loading envelopes into your Konica Minolta Printer, ensure the flap is facing upward. If the flap is on the long side, load the envelope into the machine side.
D
dcarlsonAug 28, 2025
What paper to use for Konica Minolta Printer?
- T
  taylorreedAug 28, 2025
  If you are using paper of an invalid size, thickness, or type in your Konica Minolta Printer, switch to our recommended paper.
V
vsanfordAug 31, 2025
What to do if a paper jam message persists on Konica Minolta Printer?
- C
  Carlos NolanAug 31, 2025
  If the Konica Minolta Printer displays a persistent paper jam message, it could be due to two primary reasons. First, the machine might require a reset; to do this, open and close the Right Door. Second, there may be a jammed piece of paper still inside the printer; in this case, carefully recheck the paper path to ensure all paper jams are completely cleared.
M
Matthew LewisSep 3, 2025
Why is my Konica Minolta Printer feeding multiple sheets?
- N
  Nathan StephensSep 4, 2025
  If your Konica Minolta Printer is feeding multiple sheets of paper at once, check if the sheet edges are aligned. If they aren't, remove the sheets, align the edges, and reload them into the tray. Also, ensure that the paper isn't damp. If it is, remove the damp paper and replace it with dry paper.
S
Sara BeckerSep 7, 2025
What to do if bent paper loaded in Konica Minolta Printer?
- J
  Jason HendrixSep 7, 2025
  If you've loaded bent or creased paper into the paper tray of your Konica Minolta Printer, remove the damaged paper and replace it with new, undamaged paper.
D
dianebullockSep 10, 2025
What to do if paper is damp in Konica Minolta Printer?
- N
  nmartinezSep 10, 2025
  If your Konica Minolta Printer has damp paper loaded in the paper tray, remove the damp paper and replace it with new, dry paper.

Konica Minolta bizhub C3100P Specifications

General

Duplex Printing	Yes
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Print Resolution	1200 x 1200 dpi
Connectivity	Ethernet
Type	Laser
Network Connectivity	Ethernet, Wi-Fi
Operating System Compatibility	Windows, Mac
Fax Resolution	Not Supported