Konica Minolta bizhub C350 Service Manual (English)

Other manuals for Konica Minolta bizhub C350

Questions and Answers:

M
Mark CarterJul 30, 2025
What to do if there are streaks on Konica Minolta bizhub C350 All in One Printer output?
- B
  banksearlJul 30, 2025
  Streaks or dark specks on your Konica Minolta All in One Printer output can occur for several reasons. The original glass might be dirty, so try wiping it with a soft, dry cloth. Also, the document pad or transfer belt could be dirty; clean them with a soft cloth dampened with mild detergent. If you're copying a document printed on translucent material, place a blank sheet on top. For double-sided documents, adjust the 'Density' parameter to a lighter background. Finally, the electrostatic charger may be dirty, requiring cleaning with the charger-cleaning tool.
C
Christina PerryAug 4, 2025
How to fix image alignment on Konica Minolta bizhub C350?
- L
  Laura MartinAug 4, 2025
  If the image isn't aligned properly on the paper when using your Konica Minolta All in One Printer, first ensure the document is correctly positioned against the document width scales. If you're using the reverse automatic document feeder, adjust the document guides to fit the document size. Also, make sure the original glass is clean. Ensure the document guides are snug against the document's edges, and if you're using paper from the paper drawer, make sure it's not curled; flatten it before loading.
P
Patricia KennedyAug 9, 2025
Why is my Konica Minolta All in One Printer printing too dark?
- S
  Sara PowellAug 10, 2025
  If your Konica Minolta All in One Printer's printed output is too dark, it might be due to the copy density being set too high. Select a lighter density setting. Also, ensure the document is pressed closely against the original glass during copying.
L
lance94Aug 14, 2025
How to fix light print output on Konica Minolta bizhub C350 All in One Printer?
- R
  Renee Nguyen MDAug 14, 2025
  If the printed output from your Konica Minolta All in One Printer is too light, the copy density might be set too light. In this case, select a darker density setting. Alternatively, the paper may be damp, so replace it.
D
Donald YatesAug 20, 2025
Why is the print blurry on my Konica Minolta All in One Printer?
- T
  Timothy WhiteAug 20, 2025
  If the printed output from your Konica Minolta All in One Printer is blurry, the paper may be damp, so replace it. Another cause might be that the document was not pressed closely against the original glass, so position the document so that it is pressed closely against the original glass.
K
Karl WestAug 25, 2025
What to do if Konica Minolta bizhub C350 All in One Printer prints curled pages?
- K
  Katherine SchmittAug 25, 2025
  If the printed page from your Konica Minolta All in One Printer is curled, it could be due to the type of paper used, especially if it curls easily like recycled paper. Remove the paper from the paper drawer, turn it over, and then load it again. Also, replace the paper with paper that is not damp.

Konica Minolta bizhub C350 Specifications

General

Print Resolution	600 x 600 dpi
Duplex Printing	Yes
Memory (Standard)	256 MB
Scan Resolution	600 x 600 dpi
Functions	Copier, Printer, Scanner, Fax
Print Technology	Laser
Paper Size	A4
Interface	Ethernet, USB
Scanner Type	Flatbed, ADF
Hard Drive	40 GB
Operating System Compatibility	Windows, Mac