bizhub C350 Field Service Ver.1.0 Mar. 2004 Mechanical adjustment
3-7
III Adjusting/Setting
10. Adjust with the ▲ and ▼ Keys.When
the stapling position is shifted to the
direction A: Adjust the value to the +
side.When the stapling position is
shifted to the direction B: Adjust the
value to the - side.
11. Touch “END”.
12. Make the copy and check again.
3.2.2 DF-601-unequipped machine
1. Return to the basic screen.
2. Select the functions as follows: Orig Copy
→4in1/Booklet→Booklet→Bind.
3. Set A3 or 11 x 17 original (blank paper acceptable) in the tray for original.
4. Press the “Start” Key five times (to cause reading operation five times) Adjust the varia-
tion to the minimum by using five sheets.
5. Touch the “Finish” of the panel.
6. Press the “Start” Key.
7. Take the Steps from 5 to 13 of (1) “DF-601-equipped machine” in 3.2.1 “Adjustment of
the folding position”.
4583fs3502c0
A
B
A
B
A
B
Standard: 0 ± 2 mm
<To + side> <To - side><Standard>
4583fs3525e0
▲
C350_FS_E.book 7 ページ ２００４年３月１１日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
