Utility Mode bizhub C350 Field Service Ver 2.0 April 2004
3-20
III
Adjustment/Setting
3.12 Settings in Volume Track (E. K. C.)
3.12.1 Volume Track Mode (E. K. C.)
Scanning from PC
3.12.2 Volume Track Setting (E. K. C.)
3.12.3 Volume Track Data (E. K. C.)
Functions • To select whether to enable or disable the Volume Track function.
Use • To use the Volume Track function
Setting/Procedure • The default setting is No.
Yes No
• If the option is changed from “Yes” to “No” the Volume Track data is initialized.
Functions • To select whether to enable or disable Scanning from PC for Volume Track
Scanning from PC: To scan from the TWAIN driver of a PC on the network
Use • To disable Scanning from PC during Volume Track
Setting/Procedure • The default setting is Permit.
Permit Prohibit
Functions • To set the Volume Track operations for each account
Use • To change the settings of each account
Setting/Procedure • Volume Number
Select the account (001 to 998), for which the settings are to be changed.
• Access#
Set the access # (00000001 to 99999998) for authentication for entering each
account.
• Allowances
Set the output of each of color, black, and scan.
• Upper Limit Copy + Print
Set the upper limit of printed pages to be produced in total or individually. (color
and black)
Functions • To browse, clear, or otherwise operate the counter data of each account.
• Counters are the total, copy, and printer counter.
• The counter counts are classified into the paper size, print type, etc.
• The counters for the accounts can be cleared or initialize the Volume Track Data
(E.K.C.) counters for all accounts,
Use • To check, clear, or print the counter values of each account
Setting/Procedure • The default setting is 0.
0 (0 to 999999)
To print the list, load Tray1 with A3 or 11 x 17 paper.
FS3.fm Page 20 Tuesday, April 27, 2004 3:43 PM
To Next Page
Loading...
Need help?
General
