Why does my Konica Minolta bizhub C35P All in One Printer have duplex mis-feeds?
If the duplex mis-feeds on your Konica Minolta All in One Printer, it may be due to unsupported media being used (wrong size, thickness, type, etc.). Use KONICA MINOLTA-approved media. Also, the media may still be misfed. Recheck the media path inside the duplex option and make sure that you have removed all of the misfed media.
How to fix a media type error on Konica Minolta bizhub C35P All in One Printer?
If a media type error appears, and a media type, such as “Thick paper”, is specified for Tray 1 or Tray 2, be sure to specify a media type supported by Tray 1 or Tray 2.
Why are pages not centered when printing 2 pages on a single sheet of paper on my Konica Minolta bizhub C35P All in One Printer?
Depending on the operating system, the pages are not centered on the paper when printing two pages on a single sheet of paper with the following paper sizes: Legal, Letter Plus, Foolscap, Government Legal, Statement, Folio.
How to detect Konica Minolta All in One Printer using Rendezvous/Bonjour?
Using PageScope Web Connection, select the Enable on the Bonjour page.
What to do if data was sent to the Konica Minolta bizhub C35P, but it doesn’t print?
If data was sent to your Konica Minolta All in One Printer, but it doesn’t print, it might be due to an error message displayed. Handle the issue according to the message displayed. Alternatively, if user authentication or account track settings are specified, click the User Authentication/Account Track button in the printer driver, and then type in the necessary information before printing.
Why is my Konica Minolta All in One Printer printing blank pages?
If your Konica Minolta All in One Printer is printing blank pages, check the toner cartridges, the image will not print if one or more cartridges are empty or defective. Also, check that the media type set in the driver matches the media loaded in the printer.
Why is printing taking too much time on my Konica Minolta bizhub C35P?
If printing takes too much time on your Konica Minolta All in One Printer, it could be due to a slow printing mode being enabled (e.g., for thick stock). It takes more time to print on special media, so when using regular paper, ensure the media type is set properly in the driver. It also takes time for printing to start in Energy Saver mode. Insufficient printer memory and an incorrect toner cartridge can also slow printing. Install a correct KONICA MINOLTA toner cartridge approved for your specific printer and add more memory if needed.
Why is the media wrinkled when using my Konica Minolta bizhub C35P?
If your Konica Minolta All in One Printer has wrinkled media, it could be because the media is moist from humidity or water spillage. Replace the moist media with new, dry media. The transfer roller or fuser unit might be defective, check them for damage. Unsupported media might be used. Use KONICA MINOLTA-approved media.
Why does my Konica Minolta bizhub C35P control panel display TONER LOW much sooner than expected?
If your Konica Minolta All in One Printer displays TONER LOW much sooner than expected, one of the cartridges may be defective. Remove the toner cartridges and check them for damage, replace if needed. It may also be caused by heavy toner coverage.
What to do if the media mis-feed message stays on for my Konica Minolta bizhub C35P?
If you're getting a media mis-feed message on your Konica Minolta All in One Printer, try opening and closing the right side cover of the printer again to reset it. Also, recheck the media path and make sure that you have removed all of the misfed media.
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Printing Technology | Laser |
| Duplex Printing | Yes |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Maximum Paper Size | A4 |
| Network Connectivity | Ethernet |
| Connectivity | USB, Ethernet |
| Media Sizes Supported | A4, A5, A6, B5 |
| Type | Color |
| Functions | Print, Copy, Scan |
| Operating System Compatibility | Windows, Mac |
Learn about the printer's physical components and setup requirements.
Details on the necessary space around the printer for operation.
Identifies and labels the various parts of the printer.
Diagram illustrating the front view of the printer.
Diagram illustrating the rear view of the printer.
Diagram showing the front view with optional accessories installed.
Important note regarding initial toner cartridge installation before printing.
Information about the printer driver software on the CD/DVD.
Details on PostScript printer drivers and their specifications.
Details on PCL printer drivers and their specifications.
Information about the XPS printer driver.
Explanation of PPD files required for specific operating systems.
Overview of utilities and documentation available on the CD/DVD.
Description of available software utilities for the printer.
Details on the included documentation manuals for the printer.
Specifies the system requirements for using the printer software.
Explanation of common buttons found in the printer driver interface.
How to save and manage custom printer settings.
Guide to operating and using the printer status monitor.
Overview of the Status Monitor's function and purpose.
Details on the operating systems and connection required for Status Monitor.
Steps to launch the Status Monitor application.
Instructions on how to navigate and utilize the Status Monitor features.
How to interpret status alerts and warnings from the monitor.
Steps to resolve issues indicated by Status Monitor alerts.
Procedure for closing the Status Monitor application.
Overview of the printer's control panel functions and layout.
Explanation of the indicators and keys on the printer control panel.
Details on the printer's message window content and status indicators.
How to access and use the printer's help screens.
Structure and navigation of the printer's configuration menus.
The primary menu structure accessible from the control panel.
Menu for printing or deleting jobs saved on the hard disk.
Procedure for printing or deleting stored print jobs.
How to enter a password for secured print jobs.
Menu for printing printer information like configuration pages.
Menu for managing paper settings and tray configurations.
Menu for specifying and adjusting print quality settings.
Settings for the Memory Direct function for printing from USB.
Settings related to network and interface configurations.
Menu for configuring system default settings and printer operations.
Menu for performing printer maintenance operations.
Menu for service representatives for printer adjustments.
Overview of printing files directly from USB memory devices.
Step-by-step guide to print files from a USB memory device.
Details on supported media types, sizes, and tray compatibility.
Information about different types of media the printer can use.
Guidelines for using plain and recycled paper.
Recommendations for printing on thick paper stock.
Guidelines and precautions for printing on envelopes.
Instructions and warnings for printing on label sheets.
Recommendations for printing on letterhead paper.
Guidelines and precautions for printing on postcards.
Recommendations for printing on glossy media.
Instructions for printing on one side of the paper only.
Guidelines for printing on special types of paper.
Defines the printable area on media, considering margins.
Information on setting custom page sizes and margins.
Instructions on how to load various types of media into the printer.
Procedure for loading media into the manual feed tray.
Specific instructions for loading media other than plain paper.
Step-by-step guide for loading envelopes into the printer.
Instructions for loading specialized media types into Tray 1.
Procedure for loading media into Tray 2.
Instructions for loading specialized media types into Tray 2.
Procedure for loading media into Tray 3 (optional feeder).
Guidelines for double-sided printing and supported paper types.
Information about the printer's output tray capacity and usage.
Recommendations for storing printer media properly.
General information and notes on replacing printer consumables.
Details about the printer's toner cartridges and handling precautions.
Step-by-step instructions for replacing a toner cartridge.
Instructions for replacing the printer's imaging units.
Procedure for replacing the waste toner bottle.
Instructions for replacing the transfer roller.
Procedure for replacing the transfer belt unit.
Steps to replace the printer's backup battery.
Instructions for replacing the fuser unit.
General guidelines and precautions for printer maintenance.
Instructions for cleaning the printer's exterior and internal components.
Cleaning the printer's external surfaces like the control panel.
Information on media rollers and how they can cause feeding problems.
Procedure for cleaning media feed rollers in the manual feed tray.
Procedure for cleaning media feed rollers in Tray 2 and Tray 3.
Instructions for cleaning media transfer rollers for Tray 3.
Procedure for cleaning the printer's laser lenses.
Guide to resolving printer problems and finding help.
Steps to print the printer's configuration page.
Tips and advice to prevent paper jams and misfeeds.
Diagram and explanation of the printer's paper path.
Instructions on how to safely remove misfed media.
Table listing misfeed messages and corresponding clearing steps.
Specific steps to clear a paper jam in Tray 2.
Specific steps to clear a paper jam in Tray 3.
Procedure to clear misfed media from the duplex unit.
Procedure to clear misfed media from the fuser unit area.
Steps to clear misfed media from Tray 1 and the transfer roller.
Troubleshooting common media misfeed issues and their causes.
Solutions for various printer issues not related to paper jams.
Troubleshooting steps for common printing quality issues.
Explanation of printer status, error, and service messages.
List and meaning of standard status messages displayed by the printer.
Interpretation and solutions for warning messages.
Interpretation and solutions for operator call error messages.
Information on serious error messages requiring service engineer intervention.
Overview of optional accessories available for the printer.
Important precautions to prevent electrostatic damage during installation.
Information about installing additional memory modules.
Step-by-step guide for installing a DIMM.
Information about the Hard Disk Kit and its capabilities.
Procedure for installing the Hard Disk Kit.
Information about using CompactFlash cards with the printer.
Procedure for installing the CF adapter and CompactFlash card.
Information about the optional lower feeder unit.
Lists the items included in the lower feeder unit package.
Step-by-step guide for installing the lower feeder unit.
Detailed technical specifications of the printer.
Technical specifications related to the printer hardware.
Specifications for supported paper and media types.
Details on the media input capacity for each tray.
Information on the printer's output tray capacity.
Recommended operating temperature range for the printer.
Recommended operating humidity range for the printer.
Time required for the printer to warm up before printing.
Specifications for the printer's power supply requirements.
Details on the printer's power consumption levels.
Electrical amperage specifications for the printer.
Noise levels of the printer during operation and standby.
Physical dimensions of the printer.
Weight specifications of the printer.
Details on the printer's interface ports and connectivity.
Information on the printer's standard memory capacity.
Estimated lifespan of the printer in pages and years.
Chart detailing the expected life of user-replaceable consumables.
Life expectancy for user-replaceable consumables like toner.
Life expectancy for service-replaceable parts like media rollers.
Information regarding the printer's environmental considerations.
Explanation of ENERGY STAR certification and its benefits.
To Next Page
