Why does my Konica Minolta bizhub C35P All in One Printer have duplex mis-feeds?
If the duplex mis-feeds on your Konica Minolta All in One Printer, it may be due to unsupported media being used (wrong size, thickness, type, etc.). Use KONICA MINOLTA-approved media. Also, the media may still be misfed. Recheck the media path inside the duplex option and make sure that you have removed all of the misfed media.
How to fix a media type error on Konica Minolta bizhub C35P All in One Printer?
If a media type error appears, and a media type, such as “Thick paper”, is specified for Tray 1 or Tray 2, be sure to specify a media type supported by Tray 1 or Tray 2.
Why are pages not centered when printing 2 pages on a single sheet of paper on my Konica Minolta bizhub C35P All in One Printer?
Depending on the operating system, the pages are not centered on the paper when printing two pages on a single sheet of paper with the following paper sizes: Legal, Letter Plus, Foolscap, Government Legal, Statement, Folio.
How to detect Konica Minolta All in One Printer using Rendezvous/Bonjour?
Using PageScope Web Connection, select the Enable on the Bonjour page.
What to do if data was sent to the Konica Minolta bizhub C35P, but it doesn’t print?
If data was sent to your Konica Minolta All in One Printer, but it doesn’t print, it might be due to an error message displayed. Handle the issue according to the message displayed. Alternatively, if user authentication or account track settings are specified, click the User Authentication/Account Track button in the printer driver, and then type in the necessary information before printing.
Why is my Konica Minolta All in One Printer printing blank pages?
If your Konica Minolta All in One Printer is printing blank pages, check the toner cartridges, the image will not print if one or more cartridges are empty or defective. Also, check that the media type set in the driver matches the media loaded in the printer.
Why is printing taking too much time on my Konica Minolta bizhub C35P?
If printing takes too much time on your Konica Minolta All in One Printer, it could be due to a slow printing mode being enabled (e.g., for thick stock). It takes more time to print on special media, so when using regular paper, ensure the media type is set properly in the driver. It also takes time for printing to start in Energy Saver mode. Insufficient printer memory and an incorrect toner cartridge can also slow printing. Install a correct KONICA MINOLTA toner cartridge approved for your specific printer and add more memory if needed.
Why is the media wrinkled when using my Konica Minolta bizhub C35P?
If your Konica Minolta All in One Printer has wrinkled media, it could be because the media is moist from humidity or water spillage. Replace the moist media with new, dry media. The transfer roller or fuser unit might be defective, check them for damage. Unsupported media might be used. Use KONICA MINOLTA-approved media.
Why does my Konica Minolta bizhub C35P control panel display TONER LOW much sooner than expected?
If your Konica Minolta All in One Printer displays TONER LOW much sooner than expected, one of the cartridges may be defective. Remove the toner cartridges and check them for damage, replace if needed. It may also be caused by heavy toner coverage.
What to do if the media mis-feed message stays on for my Konica Minolta bizhub C35P?
If you're getting a media mis-feed message on your Konica Minolta All in One Printer, try opening and closing the right side cover of the printer again to reset it. Also, recheck the media path and make sure that you have removed all of the misfed media.
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Printing Technology | Laser |
| Duplex Printing | Yes |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Maximum Paper Size | A4 |
| Network Connectivity | Ethernet |
| Connectivity | USB, Ethernet |
| Media Sizes Supported | A4, A5, A6, B5 |
| Type | Color |
| Functions | Print, Copy, Scan |
| Operating System Compatibility | Windows, Mac |
To Next Page
