Board switch bizhub C350 Field Service Ver.1.0 Mar. 2004
3-6
III Adjusting/Setting
4. Board switch
Symbol Description
[1] S1 Used to run the Test Mode operation.
[2] S2 Used to run the Test Mode operation.
[3] S3 DIP switch used to set the Test Mode operation.
[4] LED1 to 4
Turn ON or OFF, or blink to indicate a specific condition during Test Mode
operations.
4684fs4503c0
[4]
[3]
[2]
[1]
C350_FS_E.book 6 ページ 2004年3月11日 木曜日 午後5時6分