TECH. REP. MODE bizhub C350 Field Service Ver 2.0 April 2004
3-70
III
Adjustment/Setting
4.8.8 Server set (KRDS) / Server set (RD)
A. Server for RX
• These are the settings for the RX server used in the Remote Diagnosis System for the
standard controller.
(1) POP3 server
(2) POP3 login name
(3) POP3 password
(4) POP3 port number
B. Receive
• These are the settings for the Receive used in the Remote Diagnosis System for the
standard controller.
(1) E-Mail Address
Functions • To set the POP3 server address used for the Remote Diagnosis System for the
standard controller.
Use • To set the address of the POP3 Server
Setting/Procedure • IP Address Version 4 format
[0 to 255]. [0 to 255]. [0 to 255]. [0 to 255]
Functions • To set the logon name for the POP3 server used for the Remote Diagnosis Sys-
tem for the standard controller.
Use • To set the logon name for the POP3 server
Setting/Procedure • The default setting is No.
• Up to 64 characters (alphanumeric characters and symbols) can be used.
Functions • To set the logon password for the POP3 server used for the Remote Diagnosis
System for the standard controller.
Use • To set the logon password for the POP3 server
Setting/Procedure • The default setting is No.
• Up to 16 characters (alphanumeric characters and symbols) can be used.
Functions • To set the POP3 port number used for the Remote Diagnosis System for the
standard controller.
Use • To set the port number for the POP3 server
Setting/Procedure • The default setting is 110.
110 (0 to 65535)
Functions • To set the email address used for the Remote Diagnosis System for the standard
controller
Use • To set the email address
Setting/Procedure • The default setting is No.
• Up to 129 characters (alphanumeric characters and symbols) can be used.
FS3.fm Page 70 Tuesday, April 27, 2004 3:43 PM
To Next Page
Loading...
Need help?
General
